Propane Burners

Showing all 4 results

  • 63-51461

    Economy High Pressure Burner

    $14.89

    Our 63-5146 is a high pressure head burner. Most often used for portable cooking applications where high output is needed to bringing water, cooking oil and other liquids up to temperature quickly. This burner is mounted using the center cup through screw. At 12 PSI this burner uses 90,000 BTU/hr. It comes furnished with orifice block and orifice, the gas connection is 3/8 male flare. Versatile burner in that it can be used at low pressure setting for reduced heat output. This burner is the most popular for portable cooking systems. The burner output will vary depending on the pressure used. Great for homebrewers and turkey fryers.

     


  • 63-51401

    High Pressure Propane Burner

    $28.46

    This burner will put out a lot of heat! Applications include bottom fired kettles vats driers large crab cookers etc. Our 63-5140 is a high pressure spread head burner and is often referred to as a ransome burner. Typical applications include large bottom fired kettles vats driers large commercial crab cookers and smaller industrial applications. This burner bottom mounts using the center cup through screw and the BTU consumption is based on gas pressure range utilized. At 12 PSI this burner consumes 130 000 BTU/hr. The 63-5140 comes furnished with orifice block and orifice gas connection is 3/8 male flare (Very versatile burner in that it can be used at very low pressure setting to achieve reduced heat output.)


  • 63-51651

    Large Low Pressure Propane Burner

    $48.88

    Measures ten inches in diameter for those larger applications. Venturi is tapped 1/4″ FNPT for orifice valve installation (included). Mounts using 4 lugs on perimeter of burner with are drilled and tapped. The recommended pressure usage for this burner is 11″ WC.

    Gas connection is 3/8″ male flare.


  • 63-5145A1

    Small Low Pressure Propane Burner

    $19.88

    Measures six inches in diameter. Venturi is tapped 1/4″ FNPT to accept orifice valve (included). Burner mounts using two cast legs with are drilled and tapped. The recommended pressure for this burner is 11″ WC.

    Gas connection for this burner is 3/8″ male flare.